Epoxy Coatings
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Auburndale is a lake town. Water covers about a third of the area inside its city limits, by Census Bureau count. In low spots, soil maps show wet mucks where the water table can sit at the surface. Moisture can rise into a garage slab from below, and a coating over a damp slab can blister and peel.
Armor Garage Flooring installs garage floor coatings in Auburndale for homeowners and businesses. Auburndale is part of our service area, which covers Polk County and the Four Corners side of Central Florida. Our main garage floor system is a polyaspartic floor coating with a full flake broadcast, over concrete we grind first. Call or text (866) 282-7667 for a free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.
A plat named simply Auburndale went on record with Polk County in 1885, in what is now downtown. Auburndale Heights, just south of downtown, was platted in 1908. Prestown, just east of downtown, was platted in three units from 1952 to 1954.
Census Bureau surveys date about 1 in 3 homes in the city to before 1980. About 1 in 7 went up in the 1950s alone. The median home was built in 1990, and about 4 in 5 homes are detached single-family houses.
An older garage floor may carry oil stains or an old sealer. We grind the concrete to cut through those surface layers so the coating can bond. Cracks get filled as part of the prep.
Oil can soak deep into old concrete, and grinding alone does not always remove it. We check stains like that when we look at the job.
Some jobs are a workshop or a utility room instead of a garage. For those, our epoxy floor coatings go down with a sand finish for grip.
Auburndale is growing fast. The Census Bureau counted 15,616 people at the 2020 Census. Its estimate for July 2025 is 21,369, more than a third higher. The bureau's permit survey counted 321 new single-family homes permitted in the city in 2024 and 195 in 2025.
Several of the newest plats lie north of downtown, near Lake Mattie and Lake Juliana. Juliana Village was platted in phases from 2018 to 2021. Mattie Pointe followed in 2021, and Lake Mattie Preserve in 2025. The Bellaviva plat went on record in February 2026.
Auburn Cove, about 6 miles northwest of downtown, sits inside the city limits too. Its homes carry Polk City mailing addresses and the 33868 ZIP code. Interstate 4 is about 8 road miles north of downtown, by Polk City Road and State Road 559. Florida Polytechnic University sits about 9 road miles northwest, off the Polk Parkway.
The city's development rules also name a growth area called the Lakes District. Its design rules keep garages from dominating the street. On lots under 8,400 square feet there, the garage must be reached by an alley or a side yard driveway.
Our customers include new homeowners in new-construction communities. A full flake floor comes in several color blends to match your style.
Census figures put about 7 square miles of water inside the city, beside 13.6 square miles of land. The city runs Lake Ariana Park. Lake Arietta, Lake Myrtle, Lake Juliana and Lake Mattie lie north and northwest of downtown.
Soil maps show two kinds of ground. Candler sand covers about a quarter of the city's land. NRCS rates it excessively drained, with the water table deeper than 80 inches.
Lower, wetter spots are another story. There the maps show mucks such as Hontoon and Samsula. For Samsula, NRCS puts the water table at or above the surface except in long dry spells. In all, about 46 percent of the city's land sits in soils rated somewhat poorly to very poorly drained.
Rain adds to it. NOAA's Winter Haven station sits about 5 miles southeast of downtown. Its 1991 to 2020 normals put about 30 of the year's 52 inches of rain in June through September.
So moisture can rise into a slab from below, most of all in the wet season. Coating makers generally call for a moisture test before a coating goes on concrete. When a slab reads high, a moisture-blocking primer goes down first.
Patios and lanais take the same summer rain. Our patio coatings carry a textured finish for wet traction.
Inside the city limits, the city's Construction Services Office issues building permits. It is part of the Community Development Department. It also reviews construction plans and inspects buildings under construction.
The city's permit FAQ says work that needs an inspection to verify code compliance needs a permit. Its examples include new concrete slabs over 100 square feet within 10 feet of the home. Coating an existing floor is not on either of its lists, so ask the office about your project.
An Auburndale address does not always mean the city. Census maps put about two thirds of the 33823 ZIP code's land outside any city limits. Polk County's Building Division answers permit questions there. The city posts a 2026 City Limits Map on its website.
In a community with a homeowners association, read the guidelines before you coat a driveway or a front entry. Under Florida law, an HOA reviews a home's exterior only as far as its covenants and published guidelines allow. Our driveway coatings use a UV-stable topcoat made for full sun.
Communities and areas we serve around Auburndale: Downtown Auburndale, Auburndale Heights, Prestown, Lake Ariana Park, Lake Arietta, Lake Myrtle, Mattie Pointe, Lake Mattie Preserve, Juliana Village, Lake Juliana Estates, Auburn Cove, US 92.
Auburndale ZIP codes served: 33823, 33868.
Auburndale is part of our service area. We look at the job and put your free estimate in writing.
(866) 282-7667
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Our main garage floor system pairs a polyaspartic coating with a full flake broadcast. It cures fast and holds its color in the sun.
Learn More
Our polyurea floor coatings start with a polyurea or hybrid epoxy/polyurea base coat on ground concrete. Flake is broadcast to rejection, and a clear polyaspartic topcoat seals the floor.
Learn More
A full flake floor covers the slab in color chips, edge to edge, under a clear topcoat. Pick a flake blend to match your style.
Learn More
A quartz floor coating puts two broadcasts of colored quartz into the coating, then a clear topcoat. The textured finish has no grout lines, and it suits restaurant kitchens, commercial floors and pool decks.
Learn More
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn More
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
We coat the concrete deck around a pool with a sand or quartz finish. The texture gives the deck grip when it is wet, and a clear, UV-stable topcoat seals it.
Learn More
Armor Garage Flooring coats shop floors, warehouses, service bays and showrooms. Working floors get a sand-finish epoxy system matched to their traffic and spills.
Learn MoreA few of the questions we hear most around Auburndale. If yours is not here, call or text and ask.
Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.