These are the questions people ask most about coating a garage or shop
floor around Eagle Lake. They cover the coating systems and how the free
estimate works. If yours is not here, call or text and we will answer
it.
Is polyaspartic or epoxy better for a garage floor?
For a garage, we usually recommend polyaspartic with a full flake color blend. Data sheets call polyaspartic UV-stable, and it cures faster than epoxy. Epoxy can yellow in sunlight, so our sand-finish epoxy goes on shop floors and other interior slabs. We recommend a system once we see the floor.
How does pricing work?
We price each floor after we look at it. Size and the condition of the concrete drive the price, along with the system and flake blend you pick. Cracks and old coatings add prep time, and so does moisture in the slab. Call or text (866) 282-7667, and your free estimate comes in writing.
Do you offer financing?
Yes. Financing is available to qualified customers through our financing partner, Enhancify. You can apply online on our financing page in a few minutes, before or after your free estimate.
How soon can I walk on the new floor and park on it?
The coating manufacturer's schedule sets the times, and heat and humidity shift them. Polyaspartic data sheets list light foot traffic within hours, cars after a day or more, and full cure in days. Epoxy data sheets list foot traffic after 12 to 24 hours and full cure in about a week. Ask for your floor's schedule at the free estimate.
Can you coat the garage floor of a brand-new home?
Yes, once the concrete has cured. Coating makers' data sheets call for at least 28 to 30 days after the pour. Then a moisture test shows whether the slab is ready. Grinding takes off any curing compound or sealer before the first coat.
Does the Central Florida climate affect a coating job?
It can. NOAA's 30-year averages for Lakeland, the nearest weather station, show about 119 days a year at 90 degrees or hotter. Coating makers set heat and dew point limits for the day a coating goes down. Under about half of Lakeland, USDA soil maps show a water table that rises within 18 inches of the surface. Moisture from below can lift a coating, so coating makers call for a moisture test first.
Do I need a permit to coat my garage floor?
It depends on your town. The City of Lakeland's permit page lists flooring and painting among work that may not need a permit. The city notes the list is not complete and says to check HOA or COA rules. Outside city limits, ask Polk County's Building Division. In an HOA community, read the covenants before you coat a driveway or a front entry.
We serve Eagle Lake, Winter Haven and the rest of Polk County, including Lakeland, Auburndale, Bartow, Lake Wales, Haines City and Davenport. Past Polk County, our area takes in parts of Osceola County, Lake County and Orange County. That includes Kissimmee, Clermont and Winter Garden. Call or text with your address if you are not sure.
How long does a garage floor coating last?
That depends on the prep under it and the system on top. One flake manufacturer says flake floors can last over a decade with the right installation and care. For care, the same maker advises a sweep and a damp mop with a neutral cleaner. Harsh solvents and caustic cleaners can damage the finish. Every garage floor we coat also comes with a written workmanship warranty by package, from 3 years to limited lifetime: see our written warranty.
Request a Quote
Get In Touch With Armor Garage Flooring
Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.