Driveway Coatings
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn More
Flake floor coatings turn a plain gray slab into a floor of colored chips. Armor Garage Flooring broadcasts the flake edge to edge, then seals it under a clear topcoat. We install full flake floors across Polk County and the Four Corners side of Central Florida.
The chips are what you see. The flake manufacturer says flake adds color and texture, and the protection comes from the coating. Our full flake finish is built into our polyaspartic coating system, our main system for garage floor coatings in Eagle Lake.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.
We start every full flake garage floor by grinding the concrete. Grinding opens the surface and takes off old sealers and the weak top layer. We fill cracks and pits at this stage too. Coating data sheets call for that step, since unpatched cracks can show in the finished coating.
Next comes the base coat. While it is still wet, we broadcast flake into it until the coat takes no more. The trade calls this a broadcast to full refusal.
Once the base coat has cured enough, we scrape the whole floor to knock off loose chips. Then we vacuum it and put down the clear topcoat. The topcoat locks the chips in place and seals the floor.
Start with the blend. Each blend mixes several chip colors into one look. We offer multiple flake options and finishes to match your style. The finish choices are flake blends and solid colors. The 17 blends we offer are shown below, and our quartz broadcast colors are on the colors page.
Chip size changes the look too. Flake comes in sizes such as 1/4 inch and 1/8 inch. The flake manufacturer also makes blends of mostly tiny 1/16 inch chips with some larger ones. Those blends look close to terrazzo.
See a real sample before you decide. The flake manufacturer recommends a physical sample, and a system sample made with the actual coats shows the truest look. Ask about blends and samples at your free estimate.
Summer is the wet season in Polk County. NOAA's climate normals put about 60 percent of the yearly rain at Lakeland, the nearest weather station, in June through September. The chips give the floor a natural texture, which helps when shoes and tires bring water in. Where a floor stays wet, a slip-resistant topcoat or a texture additive adds more grip.
Flake works outdoors too, on patios and walkways. The flake manufacturer says flake suits outdoor use but advises against bold, bright colors, which can fade early. Our outdoor floors get a textured finish for grip when wet. Our patio coatings cover lanais and screened porches too.
Indoors, flake goes on garage floors first and on basement slabs as well. Showrooms and other floors where the look matters can take a flake finish as part of our commercial floor coatings.
Call or text for a written quote. We work about 45 miles around Eagle Lake across Polk County and Four Corners.
(866) 282-7667Each blend mixes several chip colors into one look. Colors on a screen are close, not exact: ask about samples at your free estimate.
From the first call or text to the finished work, here is how it goes.
Call or text (866) 282-7667, or send the form. Tell us which floor you want coated and the town it is in.
We look at the concrete, including cracks and any old sealer or coating. Then we recommend the system that fits.
Your free estimate comes in writing, with the work and the price spelled out. Once you say yes, we set a start date.
We grind the whole slab and fill the cracks before any coating goes on.
A base coat goes down, then the flake or the sand, then a topcoat. The coating manufacturer's schedule sets when you can walk on it and park on it.
Common questions about flake floors around Eagle Lake and the rest of Polk County. If yours is not here, call or text and ask.
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn More
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
Armor Garage Flooring coats shop floors, warehouses, service bays and showrooms. Working floors get a sand-finish epoxy system matched to their traffic and spills.
Learn MorePolyaspartic full flake goes on garages, with a UV-stable topcoat. Epoxy with a sand finish goes on shop floors and workshops.
Every job starts with a look at the floor. Your free estimate then spells out the system and the price in writing.

How long new concrete must cure before a garage floor coating, plus moisture tests, curing compounds, HOA rules and flake picks for Central Florida homes.
Read more →
Garage floor tiles vs epoxy for a Florida garage: the verdict, market cost ranges, hot tire pickup, expansion gaps, slab moisture, cleaning and DIY.
Read more →
Polyurea vs polyaspartic garage floor coatings: why many systems use both, UV yellowing, cure speed, flexibility, Florida slab moisture and market cost.
Read more →
What a garage floor coating costs in Florida: market ranges for polyaspartic flake and epoxy by garage size, and what moves the price up or down.
Read more →
Polyaspartic vs epoxy for a Florida garage floor: cure time, UV yellowing, heat and humidity, hot tire pickup, thickness and market cost ranges.
Read more →Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.