Epoxy Coatings
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Davenport is a town of new homes. The Census Bureau dates about 7 in 10 homes inside the city to 2010 or later. The median home there went up in 2015. A new garage floor is usually bare concrete, and bare concrete stains with the first oil drip.
Armor Garage Flooring installs garage floor coatings in Davenport for homeowners and businesses. Davenport is part of our service area, which covers Polk County and the Four Corners side of Central Florida. Our main garage system is a polyaspartic full flake floor, laid over concrete we grind first. Call or text (866) 282-7667 for a free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.
Davenport was incorporated in 1915. By 1920, the city's own history says, it had 140 residents and a young citrus industry. Wilson Park's Golden Holly sign honors Holly Hill Groves and Holly Hill Fruit Products. The sign is part of Polk County's Citrus Label Tour.
The big growth is recent. The city counted 2,888 people in 2010 and 9,043 in 2020. The Census Bureau's estimate for July 2025 is 18,110, about twice the 2020 count. Its building permit survey counted 1,557 new single-family homes permitted inside the city from 2023 to 2025.
Most of Highland Meadows lies inside the city, with plats recorded from 2006 to 2020. Ridgewood Lakes and Providence sit outside the city line in unincorporated Polk County, on Davenport addresses. Both have new plats on record, Providence from 2025 and Ridgewood Lakes from 2026.
Our customers include new homeowners in new-construction communities across our service area. A full flake garage floor comes in several color blends to match the house.
Inside its limits, the city is small. US 17-92 runs through the middle of town, and US 27 passes about 2 miles west. The Census Bureau's current boundary file gives the city about 8 square miles of land. That is more than double its 3.7 square miles at the 2020 Census.
The 33837 ZIP code around it covers about 51 square miles. Two more ZIP codes, 33896 and 33897, carry Davenport addresses north toward Interstate 4 and Four Corners. In 2020, those three ZIP code areas held about 81,000 people, nine times the city's 9,043.
The 33896 ZIP code, home to ChampionsGate, lies mostly in Osceola County. Four Corners is a Census area that reaches into Lake County, Orange County, Osceola County and Polk County. It grew from 26,116 people in 2010 to 56,381 in 2020. Loughman, north of the city, doubled over the same years, from 2,680 to 5,417.
Vacation homes are part of the mix. In 2020, about 1 in 6 homes in the three ZIP codes was held for seasonal or occasional use. That Census group takes in vacation homes. In Four Corners, the share was more than 1 in 5.
A driveway here takes full sun and summer rain. Our driveway coatings get a textured finish for traction when it is wet.
Much of Davenport sits on deep, dry sand. NRCS soil maps put Candler sand under more than a third of the city's land. NRCS rates it excessively drained, with the water table deeper than 80 inches. Its series description notes that many Candler areas are used for citrus.
Lower ground is wetter. Over a quarter of the city's land sits in soils NRCS rates somewhat poorly to very poorly drained. Flatwoods sands such as Smyrna and Myakka are among them. In most years, their water table rises within 18 inches of the surface for 1 to 4 months.
Horse Creek, the town's first name, flows past it toward Lake Hatchineha and the Kissimmee River system. NOAA's Kissimmee station sits about 14 miles northeast. Its 1991 to 2020 normals put about 31 of the year's 53 inches of rain in June through September.
On low, wet ground, moisture can rise into a slab from below. Coating makers generally call for a moisture test before a coating goes on concrete. We look at the concrete at the free estimate and grind it before we coat.
Back patios and lanais take the same rain. Our patio and lanai coatings carry a textured finish for wet traction.
It depends on which side of the city line the house sits. Inside the city, the City of Davenport Building and Planning Department issues building permits and handles inspections. It also oversees the city's floodplain program.
The department's building page asks for a site plan when a permit covers pavers or slabs. It says nothing about coating a floor, so ask the department about your address.
Outside the city, Davenport addresses on the Polk side go to Polk County's Building Division. Its permitting page says work that needs an inspection to verify code compliance needs a permit. On the Osceola County side, the county's permit page lists painting and replacing flooring among work that needs no permit. None of these pages names floor coatings.
Homeowners associations have their own rules. Under Florida law, an HOA reviews a home's exterior look only as far as its covenants and guidelines allow. Read them before you coat a driveway or a front entry.
Communities and areas we serve around Davenport: Downtown Davenport, Highland Meadows, Ridgewood Lakes, Providence, Solterra, Watersong, ChampionsGate, Loughman, Four Corners, Ronald Reagan Parkway, US 17-92, US 27.
Davenport ZIP codes served: 33837, 33896, 33897.
Davenport is part of our service area. We look at the job and put your free estimate in writing.
(866) 282-7667
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Our main garage floor system pairs a polyaspartic coating with a full flake broadcast. It cures fast and holds its color in the sun.
Learn More
Our polyurea floor coatings start with a polyurea or hybrid epoxy/polyurea base coat on ground concrete. Flake is broadcast to rejection, and a clear polyaspartic topcoat seals the floor.
Learn More
A full flake floor covers the slab in color chips, edge to edge, under a clear topcoat. Pick a flake blend to match your style.
Learn More
A quartz floor coating puts two broadcasts of colored quartz into the coating, then a clear topcoat. The textured finish has no grout lines, and it suits restaurant kitchens, commercial floors and pool decks.
Learn More
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn More
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
We coat the concrete deck around a pool with a sand or quartz finish. The texture gives the deck grip when it is wet, and a clear, UV-stable topcoat seals it.
Learn More
Armor Garage Flooring coats shop floors, warehouses, service bays and showrooms. Working floors get a sand-finish epoxy system matched to their traffic and spills.
Learn MoreA few of the questions we hear most around Davenport. If yours is not here, call or text and ask.
Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.