Epoxy Coatings
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Lakeland has 38 named lakes inside its city limits. Much of the land between them drains slowly. In wet months, moisture can work up into a garage slab from below. Moisture coming up through a slab is a known cause of failed floor coatings.
Armor Garage Flooring installs garage floor coatings for homes and businesses in Lakeland. Lakeland is part of our service area, which covers Polk County and the Four Corners side of Central Florida. We grind the concrete first. Then the base coat, the flake and a clear topcoat go down. Call or text (866) 282-7667 for a free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.
The city's historic district guide dates Lakeland to January 1, 1885. In 1907, a realty company revised the Dixieland plat into about 600 lots. Today Lakeland has seven local historic districts, covering 1.42 square miles in all.
Garages in those districts often differ from a new build. The city's narrative for Dixieland says detached garages are common there. In Lake Hunter Terrace, many homes have an attached carport, a detached garage or a one-car garage. In Biltmore-Cumberland, some homes from the 1940s and 1950s have single-width, front-facing carports or garages.
An older slab can carry oil stains, paint or an old sealer. Coating specifications call for removing oil, grease, curing compounds and sealers before a coating goes on. We grind the concrete to take them off and open the surface.
Newer subdivisions are still adding phases inside the city. Polk County plat records show Riverstone's first phase recorded in 2019 and Hawthorne's in 2023. Lakes at Laurel Highlands, Lakeside Preserve and Villages at Bridgewater are other names locals know. Many of our customers are new homeowners in new-construction communities like these.
A new slab can carry a curing compound on top, which grinding removes. A full flake floor then covers the slab edge to edge in color chips.
Lakeland Highlands, Highland City, Polk City and Mulberry are part of our service area too. So are Auburndale, Winter Haven, Bartow and Eagle Lake.
The city counts 38 named lakes inside its limits. They range from 2.5-acre Lake Blanton to 2,272-acre Lake Parker. Hollingsworth, Mirror, Morton and Gibson are natural lakes. Crago, Bentley and Somerset formed as a result of phosphate mining.
NRCS soil maps rate about 60 percent of the city's land as somewhat poorly to very poorly drained. Pomona fine sand is the most common soil on those maps. On about half of the city's land, the same maps put the water table within 18 inches of the surface at some time of year.
Lakeland's NOAA station averages 56.82 inches of rain a year. About 34 of those inches fall from June through September. In the wet season, slabs in the low, flat parts of the city can take on ground moisture from below.
Coating system sheets set a limit on how much moisture vapor a slab may give off, and call for a moisture primer when a slab runs above it. The reading that matters comes from your own slab. One of our coating packages uses a hybrid epoxy and polyurea base system that provides moisture mitigation.
NOAA's Lakeland normals put the July high at 92.1 degrees and the August high at 92.2. The city's station averages about 119 days a year at 90 degrees or hotter. A car parked after a summer drive rolls hot tires onto the garage floor.
As a hot tire cools, it shrinks. It can pull up a coating that never gripped the concrete well. Installers call this hot tire pickup. A resin flooring maker's help page lists lack of prep as a common cause. Our floors are made to resist impacts, stains, chemicals and hot tire pickup.
Two of our coating packages finish with a clear polyaspartic floor coating over a full flake broadcast, and one of them starts with a polyurea floor coating base. Polyaspartic data sheets call the material UV stable, with resistance to yellowing. To pick a blend, browse our flake and quartz colors.
Heat also changes install day. One polyaspartic data sheet says work life is considerably shortened over 90 degrees. Data sheets also set limits on humidity and dew point.
The City of Lakeland's Building Inspection Division posts a permit requirements page. Its No Permit Required list names Carpeting/Flooring and Painting under Building. The city adds that the list is not all-inclusive. If you have an HOA or COA, the page says you should check with them for their rules.
The same page lists driveways, carports and porches among work that needs a permit. It does not name floor coatings either way. The Building Inspection Division answers that question for your address.
In the city's historic districts, the permit page says exterior renovations need Historic Preservation Board approval before a permit application. Whether a driveway or front walk coating counts is the city's call. Ask the city before work starts.
If your home sits in a community with an HOA, read its rules too. Under state law, an HOA's power over exterior looks comes from its declaration and published guidelines. Ask the architectural committee before you coat a driveway or front walk.
Communities and areas we serve around Lakeland: Munn Park, Dixieland, Lake Hunter Terrace, Biltmore-Cumberland, South Lake Morton, Lake Hollingsworth, Lake Mirror, Lake Parker, Florida Southern College, Florida Polytechnic University, Riverstone, Villages at Bridgewater.
Lakeland ZIP codes served: 33801, 33803, 33805, 33809, 33810, 33811, 33813, 33815.
Lakeland is part of our service area. We look at the job and put your free estimate in writing.
(866) 282-7667
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Our main garage floor system pairs a polyaspartic coating with a full flake broadcast. It cures fast and holds its color in the sun.
Learn More
Our polyurea floor coatings start with a polyurea or hybrid epoxy/polyurea base coat on ground concrete. Flake is broadcast to rejection, and a clear polyaspartic topcoat seals the floor.
Learn More
A full flake floor covers the slab in color chips, edge to edge, under a clear topcoat. Pick a flake blend to match your style.
Learn More
A quartz floor coating puts two broadcasts of colored quartz into the coating, then a clear topcoat. The textured finish has no grout lines, and it suits restaurant kitchens, commercial floors and pool decks.
Learn More
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn More
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
We coat the concrete deck around a pool with a sand or quartz finish. The texture gives the deck grip when it is wet, and a clear, UV-stable topcoat seals it.
Learn More
Armor Garage Flooring coats shop floors, warehouses, service bays and showrooms. Working floors get a sand-finish epoxy system matched to their traffic and spills.
Learn MoreA few of the questions we hear most around Lakeland. If yours is not here, call or text and ask.
Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.