Patio Coatings
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
Pool deck coatings from Armor Garage Flooring go on the concrete around your pool. We grind the concrete first and fill the cracks. Then a coating goes down with sand or colored quartz broadcast into it, and a clear, UV-stable topcoat seals the deck. The sand or quartz gives the surface a texture for grip when the deck is wet.
We coat pool decks at homes in Eagle Lake and across Polk County and the Four Corners side of Central Florida. A deck inside a screen enclosure is coated the same way as one in the open. The lanai and the patio beside it fall under our patio coatings. Call or text (866) 282-7667 for a free estimate.
Tell us about your pool deck and where it is. We look at the deck and put your free estimate in writing.
A pool deck is wet most days it is used. So every pool deck we coat gets a textured finish, never a smooth one. There are two ways to get it. A sand finish gives an even, sandy surface. A quartz finish uses colored quartz granules, so the texture comes with color: the 30 choices are on our flake and quartz colors page.
The work starts with prep. We grind the concrete to take off the weak top layer and any old paint or sealer. Cracks are filled before the first coat, though a crack that moves can show again. The sand or quartz is then broadcast into a wet coat until the coat will not take any more.
After the coat cures, the loose material is swept off and a clear topcoat seals the surface. The quartz finish is the same double broadcast system behind our quartz floor coatings.
A pool deck sits in full sun, and epoxy has a weak spot there. Epoxy makers' own data sheets say it can yellow and turn chalky under long sun exposure. Polyaspartic data sheets list that coating as UV-stable. So the topcoat on a pool deck is a clear, UV-stable polyaspartic.
Manufacturers build systems for this. One coating maker's color-stable quartz system sheet lists exterior environments among its uses, and its catalog lists pool decks for its quartz system. The maker of the flake and quartz says both materials suit outdoor use.
Color matters outdoors too. The same maker advises against bold, bright colors in full sun, since they can fade early. A softer quartz color suits a deck that sits in the sun all day.
The nearest NOAA station, in Lakeland, averages about 83 days a year with a tenth of an inch of rain or more. Most of that rain falls from June to September. One polyaspartic data sheet says to keep a fresh coat away from water and condensation for its first 24 hours. So the forecast picks the day, and the deck stays dry and unused while the coating cures.
Moisture also rises from the ground. Polk County's largest soil map unit is Smyrna and Myakka fine sands. NRCS puts their water table less than 18 inches down for 1 to 4 months in most years. So the slab is tested for moisture first, and a moisture-blocking primer goes down if the test calls for one.
The concrete has to be sound. A coating bonds to the slab under it, and one manufacturer's system sheet calls for sound, structurally stable concrete. A deck that heaves or crumbles needs concrete repair first, and that is a separate trade. These coatings are made for concrete, so paver, tile and stone decks are not candidates.
Call or text for a written quote. We work about 45 miles around Eagle Lake across Polk County and Four Corners.
(866) 282-7667From the first call or text to the finished work, here is how it goes.
Call or text (866) 282-7667, or send the form. Tell us which floor you want coated and the town it is in.
We look at the concrete, including cracks and any old sealer or coating. Then we recommend the system that fits.
Your free estimate comes in writing, with the work and the price spelled out. Once you say yes, we set a start date.
We grind the whole slab and fill the cracks before any coating goes on.
A base coat goes down, then the flake or the sand, then a topcoat. The coating manufacturer's schedule sets when you can walk on it and park on it.
Common questions about pool deck coatings around Eagle Lake and the rest of Polk County. If yours is not here, call or text and ask.
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
A quartz floor coating puts two broadcasts of colored quartz into the coating, then a clear topcoat. The textured finish has no grout lines, and it suits restaurant kitchens, commercial floors and pool decks.
Learn More
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn MorePolyaspartic full flake goes on garages, with a UV-stable topcoat. Epoxy with a sand finish goes on shop floors and workshops.
Every job starts with a look at the floor. Your free estimate then spells out the system and the price in writing.
Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.