Epoxy Coatings
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
The first settlers arrived in Lake Wales in 1911, and the town is still adding homes. The Census Bureau estimates that 37 percent of the city's homes were built before 1980. Another 39 percent were built in 2000 or later. Old or new, a garage slab without a coating soaks up oil drips and tire residue.
Armor Garage Flooring installs garage floor coatings in Lake Wales for homeowners and businesses. Lake Wales is part of our service area across Polk County and the Four Corners side of Central Florida. We grind the concrete first. Then we install our polyaspartic flake system, our main system for garages. Call or text (866) 282-7667 to set up a free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.
Lake Wales is growing. The Census Bureau counted 16,361 people in the city in 2020, and its estimate for July 2025 is 18,650. Its permit survey counted 409 new single-family homes authorized in the city in 2024. Another 306 followed in 2025.
Polk County property records show new subdivisions on two sides of town. On the north side, Reserve at Forest Lake and Harper Estates sit near US 27. East of downtown, Hunt Club at Lake Wales and Taylor Groves sit just south of State Road 60. All four had their first plats recorded in 2023 or 2024.
An earlier wave came in the 2000s. The Census Bureau estimates that 27 percent of the city's homes were built from 2000 through 2009. Lake Ashton Golf Club and Dinner Lake Shores had their plats recorded in those years.
We coat garage floors for new homeowners in new-construction communities across our service area. Our full flake floor finish comes in multiple flake blends to match your style.
The city has business land on US 27 as well. In 1997 the city bought land there for Longleaf Business Park, about 1.5 miles south of State Road 60. For shops and warehouses, our commercial floor coatings use an epoxy system with a sand finish.
The city describes its setting as rolling hills on the highest ground in peninsular Florida. City documents also place Lake Wales at the midpoint of the Lake Wales Ridge, a 150-mile white sand ridge. Bok Tower sits on the crest of Iron Mountain, which the city puts at 298 feet above sea level. Clear lakes lie in the valleys around town, and a 2.25-mile path follows the shore of Lake Wailes.
Under the city, the ground is a mix. NRCS soil maps put Candler sand under about 28 percent of its land. NRCS rates Candler excessively drained, with the water table deeper than 80 inches. Samsula muck covers about 11 percent, and NRCS maps it as frequently ponded.
In all, about 47 percent of the city's land sits in soils NRCS rates somewhat poorly to very poorly drained. On about 44 percent, NRCS puts the water table within 18 inches of the surface at some time of year.
A slab over wet ground can take on moisture from below, most of all in the rainy season. NOAA's Mountain Lake weather station sits a few miles north of downtown. Its normals put about 60 percent of the year's rain in June through September.
Coating makers generally require a moisture test before a coating goes on. A moisture-blocking primer goes down first when the slab needs one. Patios and lanais take the same summer rain, so our patio and lanai coatings get a textured finish for grip.
Older homes bring older floors. An older garage slab can hold old paint or sealer, plus oil that soaked in over the years. Coating guides call for removing old coatings and sealers by grinding or shot blasting. We grind the concrete before any coating goes down.
Summers here run hot. The Mountain Lake normals show about 129 days a year at 90 degrees or more. Coating data sheets set limits for heat and dew point on install day. So the slab temperature and the weather get checked first.
Hot tires can grab a coating with a weak bond and peel it up. That is called hot tire pickup. Our floors are made to resist hot tire pickup, and grinding the slab clean first helps the coating bond.
Out on the driveway, sun and rain hit the slab head on. Our driveway coatings use a UV-stable topcoat and a textured finish for wet traction.
Inside the city, the City of Lake Wales Building Division issues permits and inspects the work. Its Permit Requirements page lists driveways and patios as permit work. It lists interior alterations and renovations too.
The page does not name floor coatings. It also says the list may not be all inclusive. So ask the Building Division about your project before work starts.
A Lake Wales address can sit outside the city line. In 2020, the three Lake Wales ZIP code areas held about 41,000 people, while the city counted 16,361. Mountain Lake, north of downtown, sits outside the city in unincorporated Polk County. Homes there go to Polk County's Building Division.
Two more checks can apply. The city's Historic District Regulatory Board decides Certificates of Appropriateness for work on buildings or sites in a historic district. In an HOA community, Florida law lets the association review exterior looks only as far as its covenants allow. Read them before you coat a driveway or a front walk.
Not sure which office covers your address? Ask us at the free estimate, and we will point you to it.
Communities and areas we serve around Lake Wales: Downtown Lake Wales, Bok Tower Gardens, Mountain Lake, Lake Wailes, Crystal Lake Park, Lake Wales Ridge, Lake Ashton, Dinner Lake Shores, Hunt Club at Lake Wales, Reserve at Forest Lake, US 27, State Road 60.
Lake Wales ZIP codes served: 33853, 33859, 33898.
Lake Wales is part of our service area. We look at the job and put your free estimate in writing.
(866) 282-7667
Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.
Learn More
Our main garage floor system pairs a polyaspartic coating with a full flake broadcast. It cures fast and holds its color in the sun.
Learn More
Our polyurea floor coatings start with a polyurea or hybrid epoxy/polyurea base coat on ground concrete. Flake is broadcast to rejection, and a clear polyaspartic topcoat seals the floor.
Learn More
A full flake floor covers the slab in color chips, edge to edge, under a clear topcoat. Pick a flake blend to match your style.
Learn More
A quartz floor coating puts two broadcasts of colored quartz into the coating, then a clear topcoat. The textured finish has no grout lines, and it suits restaurant kitchens, commercial floors and pool decks.
Learn More
Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.
Learn More
We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.
Learn More
We coat the concrete deck around a pool with a sand or quartz finish. The texture gives the deck grip when it is wet, and a clear, UV-stable topcoat seals it.
Learn More
Armor Garage Flooring coats shop floors, warehouses, service bays and showrooms. Working floors get a sand-finish epoxy system matched to their traffic and spills.
Learn MoreA few of the questions we hear most around Lake Wales. If yours is not here, call or text and ask.
Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.
Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.