Garage floor coatings for homes and businesses across Polk CountyGarage floor coatings in Eagle Lake, FL
Armor Garage Flooring
Garage floor coatings in a tan full flake finish across a large empty garage
Our Services

Garage Floor and Concrete Coating Services Around Eagle Lake, FL

We coat garage floors, driveways, patios and shop floors with polyaspartic and epoxy systems. We work for homes and businesses across Polk County and the Four Corners area.

Garages come first, and the main system behind our garage floor coatings around Eagle Lake is polyaspartic with full flake. Shop floors and workshops get epoxy with a sand finish for traction. We also coat patios, walkways, driveways, pool decks and commercial floors, with a quartz finish for floors that see water, and we grind the concrete before every coating. Call or text (866) 282-7667 for a free estimate anywhere in our service area.

Epoxy floor coatings being rolled out in charcoal gray across a home garage floor
Epoxy Coatings

Epoxy with a sand finish for workshops and utility rooms

Our epoxy system goes over concrete we grind first and ends in a sand finish for grip. It suits workshops, utility and laundry rooms, basements and commercial floors.

  • Concrete ground before the first coat
  • Old paint and sealers ground off in the prep
  • Cracks filled before the epoxy goes on
  • Slab tested for moisture before coating
  • Moisture-blocking primer when the reading calls for one
  • Epoxy base coat with sand broadcast in for grip
Epoxy Floor Coatings in Eagle Lake
Polyaspartic floor coatings in a light gray full flake finish across an empty two car garage
Polyaspartic Coatings

A fast-curing, UV-stable coating for your garage floor

Our main garage floor system pairs a polyaspartic coating with a full flake broadcast. It cures fast and holds its color in the sun.

  • Concrete ground before coating, to open the surface for a strong bond
  • Cracks filled as part of the prep
  • Moisture test first, with a moisture-blocking primer when the slab calls for one
  • Slab temperature checked against the dew point on install day
  • Polyaspartic base coat with a full flake broadcast
  • Extra flake scraped and vacuumed before the topcoat
Polyaspartic Floor Coatings in Eagle Lake
Low view across a blue, gray and white full flake garage floor with a dog resting on it, polyurea floor coatings
Polyurea Coatings

A polyurea base coat that grips ground concrete

Our polyurea floor coatings start with a polyurea or hybrid epoxy/polyurea base coat on ground concrete. Flake is broadcast to rejection, and a clear polyaspartic topcoat seals the floor.

  • Concrete ground before the base coat goes down
  • Armor Plus: a polyurea base coat
  • Armor Signature: a hybrid epoxy/polyurea system that provides moisture mitigation
  • Flake broadcast into the wet base coat to rejection
  • A clear polyaspartic topcoat over the flake
  • A choice of flake blends for the finish
Polyurea Floor Coatings in Eagle Lake
Flake floor coatings in a tan and gray full flake finish across a large empty garage
Flake Floors

Color chips edge to edge under a clear topcoat

A full flake floor covers the slab in color chips, edge to edge, under a clear topcoat. Pick a flake blend to match your style.

  • Concrete ground before the base coat goes down
  • Cracks and pits filled during prep
  • Flake broadcast to full coverage, edge to edge
  • Loose chips scraped off before the topcoat
  • A clear topcoat that locks the chips in place
  • Multiple flake blends to choose from
Flake Floor Coatings in Eagle Lake
Quartz floor coatings in a red broadcast finish behind a restaurant bar, seen from floor level
Quartz Floors

Double broadcast quartz for kitchens, restaurants and wet floors

A quartz floor coating puts two broadcasts of colored quartz into the coating, then a clear topcoat. The textured finish has no grout lines, and it suits restaurant kitchens, commercial floors and pool decks.

  • Concrete ground before any coating goes down
  • Cracks filled as part of the floor prep
  • Slab moisture tested before the base coat
  • Two full broadcasts of colored quartz
  • Clear topcoat that seals the quartz
  • One continuous surface with no grout lines to scrub
Quartz Floor Coatings in Eagle Lake
Driveway coatings in a tan full flake finish on a residential driveway with masking at the curb
Driveway Coatings

A driveway coating made for Florida sun and rain

Polyaspartic flake coatings for concrete driveways and the slabs around them. A UV-stable topcoat and a textured finish suit Florida sun and rain.

  • Concrete driveways and the approach slab at the street
  • Front entry slabs next to the driveway
  • Grinding the concrete to remove old sealer and the weak top layer
  • Crack filling as part of the prep
  • Polyaspartic base coat with a full flake broadcast
  • Clear, UV-stable topcoat for full sun
Driveway Coatings in Eagle Lake
Patio coatings in a gray flake finish on a covered front porch and step of a new home
Patio Coatings

Textured, UV-stable coatings for outdoor concrete slabs

We coat patios, lanais, screened porches and walkways around Eagle Lake and Polk County. A textured flake or sand finish gives the slab grip when it is wet.

  • Back patios and lanai slabs under a screen enclosure
  • Screened porch floors and front entry slabs
  • Walkway coatings in the same finish as the patio
  • Concrete ground first, with cracks filled
  • Moisture tested before the coating goes down
  • Textured flake or sand finish for grip when wet
Patio Coatings in Eagle Lake
Pool deck coatings in a light speckled finish around a pool and spa inside a screen enclosure
Pool Deck Coatings

A textured coating for the concrete around your pool

We coat the concrete deck around a pool with a sand or quartz finish. The texture gives the deck grip when it is wet, and a clear, UV-stable topcoat seals it.

  • Concrete pool decks, inside a screen enclosure or in the open
  • The walk from the house to the pool, in the same finish
  • Concrete ground first, with cracks filled
  • Old paint and sealer ground off before the first coat
  • Moisture tested before the coating goes down
  • Sand or colored quartz broadcast for a textured finish
Pool Deck Coatings in Eagle Lake
Commercial floor coatings in glossy solid gray epoxy across an empty steel frame warehouse
Commercial Floors

Sand-finish epoxy for the floors your business runs on

Armor Garage Flooring coats shop floors, warehouses, service bays and showrooms. Working floors get a sand-finish epoxy system matched to their traffic and spills.

  • Concrete ground before any coating goes down
  • Cracks filled as part of the floor prep
  • Slab moisture tested before the base coat
  • Epoxy base coat with a full sand broadcast for traction
  • Sealing topcoat over the sand finish
  • Old coatings and sealers ground off first
Commercial Floor Coatings in Eagle Lake
Request a Quote

Get In Touch With Armor Garage Flooring

Tell us about the floor you want coated and where the property is. Call or text (866) 282-7667 or use the form, and we will set up your free estimate.

  • Call or text (866) 282-7667
  • Serving Eagle Lake, FL and the Lakeland and Winter Haven area
  • Free written estimates · garage, patio, driveway and shop floors

Request a Quote

Tell us about the garage, patio, driveway or shop floor and where it is. We look at the job and put your free estimate in writing.

Call (866) 282-7667